Specifications

In both cases, the level of the Dimmer Channel is exactly
proportional to the level of the Console Channel driving it, i.e. set
to 100%.
Patch 1–to–1
This Patch connects Dimmer Channel #1 to #96 inclusive to
Console Channel #1 through #96 inclusive; and Dimmer Channel
#97 to #512 inclusive to Console Channel #0 — the dummy
Console Channel — i.e. off.
ClearPatch
This Patch connects all Dimmer Channels to Console Channel #0
— the dummy Console Channel — i.e., off.
12.2.1 Setting a default SoftPatch
To program a default Soft Patch proceed as follows:
1 Move to the “[DIM PATCH]” menu.
2 Press the Next button to display the “Default Patches” menu:
3 To set the Clear Patch press the top two soft buttons
simultaneously. Similarly to set Patch 1–to–1 press the bottom two
soft buttons simultaneously.
12.3
Programming a Patch
Hint Before programming a new Soft Patch it is recommended that one
of the above default Soft Patches is applied. This ensures that the
Patch is at a known state, and avoids problems caused by ‘rogue’
patches.
The Soft Patch
EPD01003 Issue 3 (30/06/94) 85