User guide

93
MIDI Set- up Screen
MSC In: Disabled MSC ID:000
MSC Out: Disabled GRP ID:00
SMPTE In:Disabled
(Soft)Button Function
Exit
Go back to root menu 1
Next
No function
(1)
No function
(2)
No function
(3)
No function
Field name Value Description
MSC In
Disabled
Enabled
To enable or disable MIDI Show Control Input.
MSC ID
0 –111 Specifies an individual MSC address, allowing
messages to be sent specifically to this console.
MSC Out
Disabled
Enabled
To enable or disable MIDI Show Control Output.
GRP ID
0 –15 Specifies an MSC group address, allowing
messages to be sent to two or more consoles
(sharing the same address).
SMPTE In
Disabled
Enabled
To enable or disable SMPTE time code Input.
DMX Set-up Screen
DMX Setup
Link 1: Start Code: 00 Protocol: DMX
Link 2: Start Code: 00 Protocol: DMX
Link 2 Mode: Out Merge Input: Off
(Soft)Button Function
Exit
Go back to root menu 1
Next
No function
(1)
No function
(2)
No function
(3)
No function
Field name Value Description
Link 1: Start
Code Protocol
DMX
Link 2: Start
Code Protocol
DMX
Link 2 Mode
Output
Input
To configure link 2 to input or output.
Merge Input
On
Off
To merge DMX signals if link 2 is set as input.
Analogue Set-up Screen
Analogue Input Setup Screen
Input: 1 Function: None
Threshold: 25
(Soft)Button Function
Exit
Go back to root menu 1
Next
No function
(1)
No function
(2)
No function
(3)
No function
Field name Value Description
Input
1 –10 Input number
Function
Threshold
0 –100% Threshold percentage of 10V DC