User guide

99
Saving & Loading ShowData
VENTURA provides two mechanisms of transferring data to and from the
internal memory for storage and back-up purposes:
 a built-in PCMCIA Memory Card slot.
 a 3. 5 inch floppy disk drive.
VENTURA allows you to selectively save or load any or all of the twelve
Entities. In addition, new operating firmware can be loaded from a floppy
disk.
Saving to or Loading from a Memory Card
 Insert a memory card into the slot at the right- hand end of
VENTURA’s front trim.
 From the Root Menu Screen, press the [I/ O] followed by the
[Card] soft function buttons to call-up the Card Storage Screen:
Card Storage: {Showname}
[Save] [Load]
To Save all Entities...
If required, edit the default show
name (i.e. Show 1) by using the
QWERTY Keyboard.
Press the [Save] button
(soft function 2)
To load the selected Entities..
Press the [Load] button
(soft function 3)
 A message will then be displayed asking you to press all three soft
function buttons to confirm the operation.
To abort, press the exit button.