User guide

100
Saving to a Floppy Disk
 Insert a pre-formatted 3. 5 inch floppy disk into the Floppy Disk
Drive Unit.
From the Root Menu Screen, choose [I/ O] followed by [Disk] with the soft
function buttons to call- up the Card Storage Screen:
Floppy Disc Storage:
[FIRMWARE] [SAVE] [LOAD]
Press the [Save] button (soft function 2); the following screen will appear:
Save to Floppy Disc: {Show name }
Pages, Patch, Chans, Cues, Seqs, Stacks,
Lamps, Groups, Position, Colour, Beam,
Effects [All] [None] [SAVE]
 Select or deselect the Entities to be saved by pressing the
corresponding Entity buttons on the Main Keypad. For example,
after pressing lamp colour beam cue the display will display
these entities. By pressing Soft button All, all entities will be
selected as shown above.
To deselect an Entity, simply press the Entity button again.
 If required, edit the default show name (i.e. Show 1) by using the
QWERTY Keyboard.
Press the [Save] button (soft function 2); the following message will
appear:
Copy contents of console to floppy disc
[Press all three keys to confirm]
 When you are ready to save the chosen entities, press all three
soft function buttons.
To abort, press the exit button.