User guide

101
Loading from a Floppy Disk
 Insert a pre-saved 3. 5 inch floppy disk into the Floppy Disk Drive
Unit.
From the Root Menu Screen, choose [I/O] followed by [Disk] with the soft
function buttons to call- up the Card Storage Screen:
Floppy Disc Storage:
[FIRMWARE] [SAVE] [LOAD]
 Press the [Load] button (soft function 2); the disk drive will operate
briefly while VENTURA determines which entities have been
stored on the disk.
For example if the disk contains all entities, the following screen will
appear:
Load from Disc: {Show name }
Pages, Patch, Chans, Cues, Seqs, Stacks,
Lamps, Groups, Position, Colour, Beam,
Effects [All] [None] [LOAD]
 Deselect any Entities which you do not want to load by pressing
the corresponding Entity buttons on the Main Keypad.
You cannot select any Entities that are not on the disk.
 Press the [Load] button (soft function 2); the following message will
appear:
Load contents of disc into console
[Press all three keys to confirm]
 When you are ready to save the chosen entities, press all three
soft function buttons.
To abort, press the exit button.