User guide

Loading New Firmware
As and when operating firmware changes are made to VENTURA (e.g. to
add new features) a revised copy of the firmware will be supplied to you as
a download on the Celco website. (http://www.celco.co.uk/)
IMPORTANT NOTE
Installing new firmware will erase all stored entities (e.g. Cues, Lamp
settings, etc.) and will return general desk parameters to their default
values. Ensure that you have saved any important data to floppy disc
before proceeding.
Read carefully the release note and upgrade documentation that comes
with the new firmware.
 To load this new firmware in to the desk, insert the Update Disk
into the Floppy Disk Drive Unit.
 From the Root Menu Screen, choose [I/ O] followed by [Disk] with
the soft function buttons to call- up the Floppy Disk Storage
Screen:
Floppy Disc Storage:
[FIRMWARE] [SAVE] [LOAD]
 Press the [Firmware] button (soft function 1); the following
message will appear:
Upgrade console with new firmware
[Press all three keys to confirm]
 When you are ready to install the firmware, press all three soft
function buttons.
When the installation is complete, the VENTURA console will automatically
reboot using the new firmware.
102