User guide

24
Selecting Lamps – The Basic Method
 Firstly, ensure that the required lamp range is available by
pressing one of the Lamp Page buttons; the LED will be fully lit for
the chosen range.
If there are any Lamps selected in the other ranges, the corresponding
Lamp Page button LED will be lit dimly.
 Select the required Lamp(s) by pressing the corresponding Lamp
Select button(s) once.
The buttons LED will light- up fully to show that the lamp is now in
Controlled mode. Remember that a second press of the same button
will select Included mode and the LED will go dim. A third press will
deselect the Lamp.
To select lamps in more than one range...
 Select the Lamp(s) in one range, then choose another Lamp Page
and select the required Lamp(s) in that range, and so on.
Selecting Lamps – Shortcuts
To quickly select/deselect a block of consecutive Lamps
on one Page...
 Press and hold the Lamp Select button for the first Lamp in the
block, then briefly press the button for the last Lamp in the block;
ensure that you release the last button before the first.
For example, pressing and holding button 3 and then pressing button
10 will select Lamps 3 thru 10 (inclusive).
To toggle the mode of all selected lamps...
 Press the flip button; all Controlled Mode Lamps on all Pages will
change to Included Mode and vice versa.
To set all Controlled Lamps to Included mode...
 Press the clear button; all Controlled Lamps on the currently
selected Page will be set to Included mode.
To deselect all Lamps…
 Press the all button; all Lamps on all Lamp Pages will be
deselected.
NOTE Pressing the all or clear button also deselects all Lamp Groups.