User guide

31
X- or Y-Spread
100%
spread
50%
actual channel
level
0%
The spread sets the spread of the
effect wave around the actual
channel level.
The spread can have a value
between 0% and 100%.
A negative spread means an
inversion of the wave.
You can use this to easily change
the direction of the effect.
75%
spread
30%
actual channel
level
0%
no activity seen on
lamp during this period
If the spread is to big, there can be
areas where nothing happens.
In this figure the channel value will
stay for a while on 0%.
Effect Speed
With the speed parameter you control the speed of the effect.
Delay time between lamps
Lamp 1
Delay
Lamp 2
Delay = 64
Delay shift = 0
By using delay
times like 32, 64,
128, … You'll be
grouping the
lamps.
The Delay Shift is a delay of 256 (= one entire cycle).
This parameter is only useful with a wait time.
With no delay
time, all the lamps
move together. By
Introducing a
delay makes the
lamps follow each
other.
E.g. If you have a
Sine wave applied
to the Tilt channel
and you want it to
look like a
Mexican wave,
increase the delay
time.
The total Delay = delay + delay shift.
E.g. Delay : 20
Shift : 2
Total Delay = 20 + (2 x 256) = 532