User guide

32
Wait time
wait
The wait time is used to stop the effect for a certain amount of time. When
the effect has stopped, it will hold its current channel value.
You can change the stop position by changing the offset of the wave.
Wait shift = 1
The Wait Shift is a wait of 256 (= one entire cycle).
Wait shift Wait
= 1 = 100
The total Wait = wait + wait shift
E.g. Wait: 100
Shift: 1
Total Wait = 100 + (1 x 256) = 356
Wait & Delay time
Wait shift Wait
= 1 = 100
Lamp 1
Delay Wait shift Wait
= 1 = 100
Lamp 2
Delay Wait shift Wait
= 1 = 100
Lamp 3
By using delay time together with a wait time you can create one after one
effects.
In this example Lamp 1 starts moving again after Lamp 3 has finished its
movement.
You can make a one after one effect by using the following settings.
Delay: 0
Shift: 1
Wait: 0
Shift: 2 (number of lamps – 1)