User guide

X- and Y-Wave

With Wave parameter you choose the waveform you want to apply on a

channel. If you choose a template effect, the waveform will be "set". So

you don't have to concern yourself, which waves you need to create such

as a circle or any other template effect. However you can always change

the wave parameter to your own needs in a custom effect.

Offset

Start

Time

With the offset parameter you "set" the start position of the wave.

If you change the offset of both the X and Y wave and set them to the

same value you will only see result if you combine this with a wait time.

In this case you can choose where the effect waits for that particular wait

time. You can choose any place in the cycle to stop the effect.

The offset also determines the start position of the effect when you start

the effect.

Frequency

X wave

Freq: 1

Y wave

Freq: 2

With the frequency you can

set how many times the

wave loops in one cycle.

In this example the Y-Wave

goes twice as fast as the X-

E.g. A figure eight uses the

same waves as a circle only

the frequency of the Y-wave

is 2 and the frequency of

the X-Wave is 1.

Rotation

The rotation is only used with position effects. With this parameter you can

rotate the whole figure you have created with an angle between 0° and

Wav

359°.