User guide

36
Flexibility !
Once you have started an effect it is very easy to play with it. You can
always change any parameter without stopping the effect. This gives you
the possibility to be very creative with the effects. The effect also takes the
actual value of the controlled channel as its base level. You can always
change these base values by just changing the channel value.
Examples:
 After you have started a circle effect, you can play with the Pan
and Tilt channels to change the position where the effect is played.
 You can make a sequence on the base values (e.g. pan and tilt)
and apply it together with an effect.
 Just by changing the X-Spread to a negative value, you can
change the direction of an effect.
 By adding a delay time you can create nice follow effects.
 Combining a strobe effect together with a position effect you can
change a slow movement into a wild strobe movement. After
stopping the strobe effect the shutter will be back to the open
position and you'll see the regular movement again.
Hints and tips.
Grouping Lamps.
Number
of groups
Delay Number
of groups
Delay
1
2
3
4
5
6
7
8
0
128
85
64
51
42
36
32
9
10
11
12
13
14
15
16
28
25
23
21
19
18
17
16
Effect templates.
Position effects.
Type Pattern Type Pattern
Circles Wave
Figure 8 Complex1
Zig Zag Complex2
Up Down Complex3