User guide

Programming a Sequence
The Basic Process
 Call-up the Sequence Entity Screen on the Main LCD (e.g. by
pressing seq 1 next):
Seq: 1 {Seq 1 } Length: 0
Step: 1 Contents: Empty
Space: 97.39%
[Fold] [End]
 If you haven’t already pre-selected the required Sequence number,
choose it now via the Seq field.
 If required you can change the default Sequence label (e.g. Seq 1)
to a more meaningful name; move the cursor to the label field and
type in or amend the label via the QWERTY keyboard (or by using
the Main Keypad as described on page 74).
 Check that the Step field is set to Step 1.
 Set-up the Lamps and/ or reserved HTP Channels as required for
the first Step (refer to pages 24 to 28 for Lamps; page 14 for HTP
Channels).
 To save the current Lamp settings to the Step, press the store
lamps button in the Lamp Selection Area.
To save the current HTP settings to the Step, press the store htp
button in the Lamp Selection Area.
Pressing either of the store buttons will automatically advance the Step
field value to the next Step.
 Repeat the last two operations to program the remaining Steps.
HELPFUL HINT
To save both Lamp and HTP settings to the same Step, save Lamp (or
HTP) settings first. Then decrement the Step field value by 1 and save the
HTP (or Lamp) settings.
 You need to mark the ‘end’ of the Sequence.
After you have saved the last Sequence Step, the Step field will
have incremented. For example if you have programmed 10 Steps,
the Step field will now be showing 11 —this is correct, so don’t
alter this value!
 To mark the end of the Sequence, press the [End] button (soft
function 3).
IMPORTANT NOTE
Having completed your Sequence, it now needs to be assigned to a Cue in
order for it to be replayed —see page 49.
58