User guide

Sequence Mode
To put the Digital Playback Control Area into Sequence Mode, press the
seq button; the button LED will light up and the Sequence Preview screen
will appear on the Main LCD (see next page).
 If there are two or three Sequences assigned to the same Cue,
further presses of the seq button will reveal details for each
Sequence in turn.
HELPFUL HINT
To short cut to a sequence in a cue, press the relevant cue preview button
and than press the seq button. This will place the first sequence in this cue
in the sequence preview screen.
Sequence Preview Screen
Seq: 1/1 Cue:1 As:1 PB:1 Seq 1
BPM:60 STL:None Dir:Fwd Ord:Linear
Times HTP:Snap LTP:Fade At End:Loop
Level:100 AF:Time Part 1 [MENU]
Press the menu soft button to call- up the Root Menu screen; Sequence
Mode will remain active. To return to the Sequence Preview screen, press
the seq button again.
Field Name Value Description
Seq view only
Sequence number / Step number.
Cue view only
Cue number that the Sequence is
assigned to.
As view only
The Sequence assignment number (i.e.
1, 2 or 3) within the Cue.
PB view only
Playback number that the Cue/
Sequence is assigned to.
{ . . . . . . . . } view only
Sequence label.
Speed
1 – 600 Defines the stepping speed of the
Sequence in ‘beats per minute’.
Dir
Fwd
Rev
Bnc
Defines the stepping direction of the
Sequence (forward or reverse). The
bounce (Bnc) option performs a forward
cycle followed by a reverse.
Order
Linear
Random
Defines the order in which the
Sequence Steps are replayed; Linear is
the programmed order, whilst Random
gives a pseudo-random replay action.
Times HTP
Snap
In/ Out
Fade
LTP
Snap
Fade
At End
Loop
Stop
Level
0 to 100% The multi- function digital fader is
assigned to this parameter.
AF
None
Time Part 1
Time Part 2
Time Part 3
Time Part 4
This feature is not implemented in this
version firmware.
64