User guide

Stack Mode
To put the Digital Playback Control Area into Stack Mode, press the stack
button; the button LED will light up and the Stack Preview screen will
appear on the Main LCD.
Stack Preview Screen
Stack:1 Stack 1 Len:1 Rate:0 %
> : <
1 :001 Cue 1 hh:mm:ss:ff
TP:1 Xf:00:00.0 Wait:Man 00:00:00:00
Field Name Value Description
Stack
1 – 99 Stack number
{ . . . . . . . . } view only
Stack label.
Len view only
Number of entries in the stack.
Rate
-500% – 500% Replay rate.
>….<
Cue on stage.
1 – 999 Entry number in preset.
view only
Cue number.
{ . . . . . . . . } view only
Cue legend.
TP
1 – 4 Time part.
Xf view only
Cross fade time.
Wait view only
Wait mode.
view only
Wait time code.
Stack Control Functions
 Enter the stack number you want to replay
 Press the enter button twice and change the entry in preset to 1
by using the rotary control.
 Press the go button and the stack will be running as programmed.
Changing the Playback rate
Move the cursor the Rate field and change the global replay rate by using
the rotary control. The rate can be adjusted from –500% to 500%.
Pausing the Playback
The stack replay can be paused , at anytime, by pressing the go button.
Whilst the replay is paused the stack button will flash. To restart the
paused stack press the go button and the replay will continue.
Taking manual control
At anytime during stack replay the operator can take manual control by
using the multi-function digital fader. Whilst a cross fade is in progress the
LED’s in the digital fader illuminate to show the current level of fades. If
whilst a fade is in progress the fader is moved this will cause the stack to
pause and manual control of the cross fade is then possible. Moving the
digital fader up will increase the level of the next cue and reduce the level
of the current cue. Pressing the go button will put the stack back into
normal mode and cross fading will continue from the current fade levels.
66