User guide

Stack Entity screens
From the root menu, press Stack and next.
Stack entity screen 1
Stack:1 {Stack 1 } Len:0
Entry:1 Cue:1 Cue 1
TP:1 XFade:As Cue --:--.-
Wait:Man 00:00:00:0 [Record] [MAKE]
(Soft)Button Function
Exit
Go back to root menu
Next
No function
(1)
To fold or unfold the sequece steps on cue faders. (for
details see page 59)
(2) Record
Time stamp SMPTE time code
(3) MAKE
This is used to build a stack with a range of entries.
Field name Value Description
Stack
1 – 99 The chosen Stack object number (or
grouping).
{ . . . . . . . . } free text
A user- defined label of up to 8
characters and/ or numerals to identify
the chosen Stack. (Default is
Stack 1,
Stack 2, etc .)
Len
2 – 999
Entry
1 – 999 Entry number
Cue
1 – 999 Cue number assigned to the stack entry
XFade
Timed
As Cue
Defines the cross fade time between
cues. Timed uses the time entered in
the time field. As cue uses the times
programmed in the cue.
Wait
Auto
Man
SMPTE
Auto uses the wait time set. Manual
waits till the go button is pressed.
SMPTE uses the SMPTE time stamps.
Stack make screen
Make/Replace Stack Entries
Starting with Cue:1
Ending with Cue:1
[Press all three keys to confirm]
(Soft)Button Function
Exit
Go back to stack entity screen
Next
No function
(1)
(2)
(3)
Press all three keys to confirm to load new firmware
onto the Ventura.
Starting with Cue: Set the starting Cue of the range.
Ending with Cue: Set the ending Cue of the range.
80