User's Manual

Ⅲ manual opration
1. Networking: Plug in the power cord, turn on the power switch (the first time the power is turned on, it will not work and disinfect), press
and hold the work switch for 6 seconds to enter the networking mode, the networking indicator starts to flash, and the networking starts.
2. One-minute work: Press the work switch once, and the door will automatically pop open. The default work time is 1 minute. Close the door
again and start disinfection for 1 minute.
3. 15-second work: press the work switch twice, the work time is converted to 15 seconds, after the two beeps (Di...Di...) are finished, close the
door, start the work disinfection for 15 seconds, the disinfection work is completed, the working time Change to the default working time of
1 minute.
4. Manual door opening: When the door is not powered on or needs to be opened manually, take a tool with a length of 15cm and a diameter
of 5mm, insert it horizontally from the position where the door is manually opened, and then gently press it down vertically until the door is
popped open.
IV. Note:
1. The surface of the lamp should be kept clean.
2. The lamp is fragile. Please handle it with care.
V. Warning
SAVE THESE INSTRUCTIONS
Safety classification
Class Ⅰ
Dimensions(L*W*H)(mm
L246.2*W223.4*H626.7mm