Data Sheet

Classic

F12-X200

Finally, a dedicated guitar speaker for amp modellers and IRs. The

F12-X200 is a truly full range driver that delivers a frequency response

from 60Hz all the way up to 20kHz, the higher frequency part of the signal

is reproduced using a Celestion compression driver which has been

integrated using a high quality crossover circuit. This enables the

F12-X200 to reproduce the full spectrum of audible frequencies, for the

most accurate output possible, whatever your environment and

set-up. <div>The F12-X200's response is remarkably neutral, with Celestion

technology built in to ensure there are no unwanted colourations that can

overpower the input signal. However, the lighter moving mass and straighter

sided cone of the type commonly used with guitar speakers gives the X200

the feel and live response of a traditional guitar speaker, delivering all

the physical feedback you'd expect from playing through a conventional

guitar rig. </div><div></div><div>Used with amp modellers or IRs, in a

backline cab or a wedge monitor, on stage or in the studio, it doesn't just

sound like great guitar tone, it feels like it too. </div>

8 Ω Frequency Response

General Specifications

Nominal diameter 12"

Power rating 200W

Nominal impedance 8 Ω

Sensitivity 97dB

Chassis type Pressed steel

Voice coil diameter 2"

Voice coil material Round copper

Magnet type Ceramic

Frequency range 60 - 20,000Hz

Resonance frequency, Fs 75Hz

Mounting Information

Cut-out diameter 11.1", 283mm

Diameter 12.2", 309mm

Magnet structure diameter 6.7", 170mm

Mounting slot dimensions 0.31", 7.9mm Ø

Mounting slot PCD 11.7", 297mm

Number of mounting slots 8

Overall depth 6.5", 165mm

Unit weight 9.1lb, 4.1kg

Celestion, Claydon Business Park, Great Blakenham, Ipswich, IP6 0NL United Kingdom