POWER TANK With Built-in Spotlight & Flashlight (plus 3V, 6V, 9V, output) Model: #18774
TO RECHARGE IMPORTANT - Make sure that your battery charger is suitable for the home electric supply before recharging. (Fig. 1 & 2) - Charge your PowerTank before using the first time. - Always make sure the switch is “OFF” when not in use. - Never attempt to use the battery charger provided for other products. (Fig. 4 or 5) - If yellow LED light is on during operation, battery is weak and should be recharged (Fig. 7).
TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION 1. NO LED INDICATOR (LOW or CHARGE) WHEN SWITCH IN ‘ON’ POSITION CIRCUIT BREAKER BREAKS THE CIRCUIT RESET THE CIRCUIT BREAKER ACCORDING TO THE INSTRUCTIONS 2. NO LED INDICATOR (FULL or CHARGE) WHEN RECHARGING. CIRCUIT BREAKER BREAKS THE CIRCUIT RESET THE CIRCUIT BREAKER ACCORDING TO THE INSTRUCTIONS RESET THE CIRCUIT BREAKER CIRCUIT BREAKER BREAKS THE CIRCUIT 3. DC-OUTPUT DOESN’T WORK.
