User Manual

ENGLISH | 5 4 | ENGLISH
CARE, MAINTENANCE, AND WARRANTY
Your Imager is a precision optical instrument and should be treated with
care at all times. Follow these care and maintenance suggestions and your
Imager will need very little maintenance throughout its lifetime.
• Store the Imager in a dry and clean place.
• Be very careful if using your imager and microscope in direct sun light to
prevent damage to the Imager or your eyes.
• Never point the Imager towards the sun or the sensor can be damaged
and cease working.
• To clean the housing, use a damp cloth and dry immediately.
• Use a good lens tissue to clean the clear glass end (optical surface) of
the Imager.
• If needed, blow off dust with a camel’s hair brush or air blower off the
optical surfaces.
• To clean fingerprints off of optical surfaces, use a lens cleaning agent and
lens tissue available at most photo outlets and when cleaning do not rub in
circles as this may cause streaks or scratches to occur.
• Never disassemble or clean internal optical surfaces. This should be done
by qualified technicians at the factory or other authorized repair facilities.
• Do not disassemble or take apart the Imager or damage can occur.
WARRANTY
Your Imager has a two year limited warranty. Please see the Celestron
website for detailed information at www.celestron.com.
APPROXIMATING THE FINAL MAGNIFICATION
The approximate power is determined by the Imager power multiplied
by the objective lens power. The Imager has a 30x magnifying lens
built in. As an example, if the objective lens being used is 4x, then
the power you will be capturing for snapshots or video will be 120x.
If using a 40x objective, then the power will be 1200x, etc.
ROTATING THE IMAGER
When you are looking at the image on your computer screen,
you can rotate the position by rotating the Imager to the position
you prefer.
USING THE CELESTRON IMAGER HD SOFTWARE
The software is very easy to use and should be very intuitive. there
are many features that you can control however, so if you wish
to delve deeper into the Celestron Imager HD software, click the
Manual icon in the software
or download the software manual
from the product page at celestron.com.
YOU ARE NOW READY TO BEGIN YOUR DIGITAL ADVENTURE!