Instruction manual

45
Appendix 6 Parts List
PART DESCRIPTION #
RoboFocus Unit Module with processor 1
Power Supply 12V 0.8A positive w 5.5/2.1 plug 1
Instructions Manual 1
Compact disc CD with RoboFocus Control Program 1
Stepper Cable 9 conductor with M/F DB9, eight feet 1
Connection Cables PC-RoboFocus 6-cond cable 12 ft. 1
PC1 adapter Converts DB9 on PC to telephone cable 1
Stepping Motor
Assembly
R&P: Motor w/plug&plate, clutch coupling w/ allen wrench, two brackets,
double-back tape (8”), hardware: c
-------OR -----
S-C: Motor/sprocket on bracket w/double-back tape, sprocket & bushing, belt
(LX200 standard/Celestron optional)
-------OR--------
JMI: NGF-S. Motor with extended shaft and inboard ball bearing to install in
place of JMI DC motor, 1/16 and 3/32 allen wrenches, 6-32x3/8 screws(8)
-------OR--------
JMI NGF-DX3. Motor/bracket with extended shaft to install in place of JMI
shaft, 1/16, 5/64, 3/32 allen wrenches, 10-32x1/4 screws(2)
OR
MANDEL WIDE FIELD: Motor/sprocket, 2 flat aluminum brackets plus
6-32x3/8 screws (8)
OR____
_________________________________
VAN SLYKE FOCUSER – motor and all attaching hardware must be obtained
from Van Slyke Engineering
1 set
0
OPTIONS
Additional motor Specify type 1
Hand Control Two button hand control with LED plus one cable, 6-cond 12 ft 1
1
Remote Power
Module
Provides four channels for 120VAC power control, w/12ft 6cond cable, 6 ft
power cable
1 set
LX200 Scope
Adapter
3 jack adapter, w/ two 6-cond.cables (six inch length, 12 ft length). Provides
proper adapter for serial feed-through to LX200 (accommodates hand control if
used).
1 set
AP GTO Scope
Adapter
6-cond.cable (12 ft length) and TE-1 to provide proper adapter for serial feed-
through to AP GTO mount. (Add special 3-jack adapter + 6” cable if the
optional hand control is used.)
1 set
Other Scope Adapter Please inquire about adapters for other scope mounts
PC1 adapter Converts DB9 at PC to 6-cond telephone cable 1
Special Cable Custom length, on request; specify length and whether 6-pin or 9-pin 1
External Temp
Sensor
Sensor with cable, instruction 1 set
Appendix 7 Ins Manual Revisions
Date Revision
122801 Issue new manual for V3.2
011602 Amend Maxim autofocus strategy, troubleshooting table, C14 spacer, version changes, mult RFCP
Ddw/robofocusins3.doc