Instruction manual

70
Press Menu, Press DOWN 2X, Press
ENTER.
Enter into the CATALOG menu.
N
EW01
Press ENTER, Press ENTER, Press UP. Change to a different NEW object,
for this example NEW02.
NEW0
2
Press ENTER, Press ENTER. This allows you to set the coordinates
to the position the telescope is
pointed.
S
ET TO
CUR POSN
Find another object and center it in the
telescope.
S
ET TO
CUR POSN
Press ENTER Set the coordinates to the NEW
position.
1234+543(example)
NEW0
2
Press the MENU button and go back to the
ALIGN menu.
MENU
A
LIGN
Press ENTER Enter into the ALIGN menu.
E
ARTH
NEW02
Press ENTER Choose the EARTH option under the
ALIGN menu.
NEW OBJ
NEW0
2
Press ENTER Align to object. A warp displays for
a few seconds, then the display
returns to EARTH.
E
ARTH
NEW02
Now you are aligned to two terrestrial objects. You can slew back and forth between them and you can also define NEW
objects 3-27 as other terrestrial objects. But when you define other objects, you can skip the align operations because you
are already aligned. If you want to view these same terrestrial objects after turning off the telescope, you need to align to
any two NEW objects. It is important to make a note for yourself which terrestrial object is in what NEW memory
position if you plan on aligning to them again later. It is also important that the telescope is set up in the same location so
the relative positions of the terrestrial objects have not changed.
EARTH - Terrestrial Alignment to User Defined NEW Objects
Let’s say you have previously defined a few terrestrial objects of interest that you would like to align the Ultima 2000 to
again. Since the objects are already in the user defined NEW database, all you have to do is align the telescope to any
two of them. Here is how.
BUTTON or ACTION
NOTES DISPLAY
Set the telescope up in the same location as
when you defined the objects.
Turn the scope ON and set it to the
downstops. (Turn tracking OFF)
MENU
A
LIGN
Press ENTER This is to set the downstops.
S
ET FORK
TO ZERO
Press ENTER Define the azimuth downstop.
T
UBE TO
DOWNSTOP
Press ENTER Define the altitude downstop.
S
KY
ACHERNAR
Press MENU, scroll to CATALOG. MENU
C
ATALOG
Press ENTER, press DOWN. Let’s assume you are going to align
to NEW01 first.
N
EW01
Press MENU, scroll back to ALIGN. Press
ENTER.
Enter into the ALIGN menu.
S
KY
NEW01
Press DOWN Scroll down to the EARTH option
under the ALIGN menu.
E
ARTH
NEW01