Use and Care Guide

10
COOLING MODE
The cooling function allows the air conditioner
to cool the room while dehumidifying the air at
the same time.
To activate the cooling function (COOL), press the MODE
button until the symbol (COOL) appears on the LCD
display.
The cooling cycle is activated by using the or keys
to set the system to a temperature lower than that of the
room.
To adjust the system to an optimal level, set the temperature,
the speed, and the direction of air flow using the correct
keys.
The heating function allows the air conditioner
to produce hot air either through a heat pump
or using electric heat.
To activate the heating function (HEAT), press the MODE
button until the symbol (HEAT) appears on the LCD
display.
The heating cycle is activated by using the or keys
to set the system to a temperature higher than that of the
room.
To adjust the system to an optimal level, set the temperature,
the speed, and the direction of air flow using the correct
keys.
HEATING MODE (SELECT MODELS)
Each unit that includes heating is fitted with
a Hot Start function, which delays immediate
startup of the system for several seconds so
that air produced will be immediately hot.
During heating mode, the unit can automatically
activate a defrost cycle, which is essential to
clear the condenser from a excess desposit of frost.
The process usually lasts for 2-10 minutes and
during defrosting, the fan will stop operating.
After completing the defrost cycle, it will return
to heating mode automatically.
MODES OF OPERATION