Use and Care Guide

Note: each mode and relevant function will be further specified in following pages.

Transmits signals to the system.

Signal Transmitting Window

Temperature Adjustment

(All modes)

(ÝC ÝF ) Temperature

( h ) Timer Setting Mode

Transmitting Icon

Setting Display

ON/OFF Button

Starts and stops operation

TIMER Button

Selects TIMER operation

UP Button (TOO COOL)

Increases the set room temperature (16°C - 31°C)

and time (0.5h-24h)

DOWN Button (TOO WARM)

Decreases the set room temperature (16°C - 31°C)

and time

SLEEP Button

Sets or cancels sleep function

SWING Button

Adjusts airflow direction

FAN Button

Controls the indoor fan motor speed:

Auto High Med or Low

(This function does not work in sleep mode)

MODE Button

Selects the type of operating mode:

FEEL

COOL

DRY

FAN

HEAT

(Heating function not available in all units)

FEEL mode selects the operating mode

automatically depending on the room temperature

FEEL mode is the default initial mode

REMOTE CONTROL

NOTE: The Remote controls all functions of the system.

If it is lost, the system can still function using the EMERGENCY BUTTON,

but certain functions will not be accessible.