Sterilizing rate 99.
Contents Thank you for using this product··································································· 01 Smart UV lamp - giving you sun-like comfort················································ 01 Touch button control panel··········································································· 02 Description of the colorful lights··································································· 03 Radar intelligent human induction ensure safety ········································· 03 Wi
Thank you for using this product! In order to enable you to use this product correctly and give full play to the effectiveness of the product, please read this manual carefully before using and fully understanding the relevant matters, especially the parts marked "Warning" "Caution" in boldface. While using it, please correctly understand the performance of this product and strictly follow the operating procedures. This user manual is revised and released by CellAllure.
Safety Radar Immediate Shut Down Smartphone Voice Control Buzzer Warning Child Safety Lock Multiple Time Setting WiFi Module Display Harmful for humans and pets. Safety radar immediate shut down near human and pets. Buzzer Warning Child Safety Lock Touch button control panel 1. Power button: Touch once to turn on, the colorful indicator lights up in blue, touch again to turn off, and cycle in turn. 2.
Description of the colorful lights 1. Power on the equipment 1) If there is no distribution network, turn on the power supply, the color light of the equipment will be on for 1s, and then the blue light will flash slowly. 2) If the distribution network has been connected, the color lights of the power supply equipment will be on for 1s, and all lights will not be on 2. Turn on the power and press the power key to enter the standby mode.
Control from anywhere Wi-Fi smart network module The product adapt to different product forms Stable communication: global stable operation Good performance: strong chips support data operation Ultra-low power consumption: smoother product use Smart display Control Many time levels freely adjustable Choose the appropriate sterilization time according to different regional occasions to achieve sterilization After setting the sterilization time, the lights will be turned off automatically.
Register and log in 1）Go to the App store and download the "tuya" APP. 2）After successfully download the “tuya “APP then installs it. 3）Open "tuya" and select "Register Account" to enter complete information to register. 4）After successfully register, enter the registered account and password , then click "Log in" to enter “Add Device” menu. Network paring 1. Connect your phone to the normal 2.4G Wi-Fi network. 2. Turn on the device and power switch. 3.
Tuya app control Enter the control menu, do as the following shown： 1. Click on / off, default time is 10 seconds to turn on the UV-C lamp (start the radar detection, if the moving body or animals are detected, it will not start until 10 seconds after detecting the living body or animal left) 2. Timing function: You can set to start/stop the UV lamp from a certain time (default working time is the current default time selected on the main panel). 3.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Sterilizing rate 99.
