Specifications
CellarMate Manual Page 12
WARNING
Note: The electrical outlet and wiring installation must meet national and local
building codes.
• Use an electrical outlet configured to match the plug on the CellarMate.
• Confirm that the wiring and breaker conform to the rated load listed on the
serial plate. See illustration below.
•
• Use a dedicated circuit and wiring.
• Do not modify the plug in any way.
• Do not use extension cords.
IMPORTANT
Use only 115 volt or 230 volt (depending on model) AC1 phase/60 cycle power
supply with a variance no greater than +/-4% to avoid damage.