User Manual

Confidential, Proprietary Information
Title: PCS FlexBeamer
®
RF Repeater
System A &O Manual
Doc. No.:
913002500
Rev.: 00
Page: 23 of
80NUMPAGES
2. RF REPEATER SYSTEM
INSTALLATION GUIDE
2.1. Scope
This chapter describes the installation of the PCS FLEXBEAMER® RF Repeater System and its
integration into the PCS Network by properly setting up the Repeater parameters .
The FLEXBEAMER® RF Repeater System is basically a modular tower top Repeater with the
FLEXBEAMER® Sector Active unit at the Distribution side of the Repeater and the BAU and RAC,
being assembled near the Donor Antenna , includes the Donor Side LNA , Donor Side Power amplifier
and all the Telemetry , Monitoring and Control ( Including the Wireless Modem as an option). The
FLEXBEAMER® RF Repeater is equipped with programming and modularity features that are
uncommon with other, comparable systems.
The chapter details the instructions for field installation of the FLEXBEAMER® RF Repeater system.
It is intended to be used by customer technical personnel, who are trained to install and service the
FLEXBEAMER® RF Repeater system.
2.2. Important Safety Precautions
The system is supplied following extensive acceptance production line tests. Usually, lab tests will not
be required before installing the unit at the customer's location. One should always be aware of the
necessary safety precautions, assuring that the FLEXBEAMER® Repeater system will be fully
functional after the installation.
Read this instruction guide thoroughly before starting with the installation. In case of doubt, do not
hesitate to call Celletra Customer Support engineering. Celletra Customer Support contact points are
given at :
WWW.CELLETRA.COM or Email to [e-mail]
2.2.1. Handling and Moving the FLEXBEAMER® System Units
The FLEXBEAMER®, BAU and the RAC are delicate and accurate electrical apparatus.
• Use extreme caution when handling the units. Always use the original box, with proper
padding, when delivering or moving the FLEXBEAMER® system units.
• The FLEXBEAMER® overall unit weight is ~12kg. If necessary, each unit should be carefully
carried by one person. When there is a need to hang a unit to bring it up the tower, use the
hangers for that purpose. (Shown in the mechanical drawings).