User Manual

Confidential, Proprietary Information
Title: PCS FlexBeamer
®
RF Repeater
System A &O Manual
Doc. No.:
913002500
Rev.: 00
Page: 24 of
80NUMPAGES
• The RAC module overall weight is 12 Kg. The RAC can be carried by one person .
For lifting it up the RAC up tower, use the clamps mechanical base units.
• The RAC Module is Hermetically sealed in controlled environment. Do not open any
of the covers or disassemble the BEAMER
®
units attached to it. This should be done
only in a controlled environment by Celletra authorized Personnel.
• The FLEXBEAMER® module overall weight is 8 Kg FLEXBEAMER® hardware is
hermetically sealed in controlled environment. Do not open or try to disassemble a
BEAMER
®
module. This should be done only by Celletra authorized personnel.
BEAMER
®
modules can be replaced by authorized personnel only following the
instruction herein.
• Use extra caution when installing the unit on tower top. Use proper winch or pulley to
lift the unit up the tower. Watch carefully for possible obstacles when lifting the units.
Pad the units, if needed, to avoid possible damage during lift-up.
• Always shut down the AC or DC supply to the RAC before replacing or removing the
FLEXBEAMER® or BAU from the tower.