User Manual

Confidential, Proprietary Information
Title: BEAMER Array System-
Assembly and Operation Manual
Doc. No.: 913002500 Rev.: 00
Page: 66 of 80
5.2.2.3. File Name Format for DSP
Files will be identified by the following suffixes:
• DSP Program file: name.dpm
• DSP Data file: name.ddm
5.3. User Interface for SW Download
5.3.1. Functions
The Software download program enables download program files to the RAC and the BEAMER
®
module from a local PC-based host computer.
Its main functions are:
• Selection of the target for downloading (BEAMER
®
or RAC)
• Selection of files to be loaded
• Transmission of files from the PC to the selected target (BEAMER
®
or RAC).
• Monitoring of transmission process
5.3.2. Requirements for Operation
5.3.2.1. Hardware
• Pentium
TM
-based PC
• Free serial port from the PC
• At least 4 Mb free RAM
5.3.2.2. Software
Window 95/98/NT operating system
5.3.3. User Interface Installation
The software is installed from a diskette supplied by Celletra.
1. Put disk no.1 in the floppy drive and run "Setup".
2. Follow the instructions on the screen until completion of installation.
The program will be installed in the "Program files" subdirectory of the “Windows” directory.
5.3.4. User Interface Operation
The program can be operated from the program menu in the start menu. Another option is to create a
shortcut for the program from the "Program files" subdirectory in the Windows directory and operate
the program by clicking the icon