User Manual
Table Of Contents
- CONTENTS
- FIGURES
- TABLES
- INTRODUCTION
- INSTALLATION GUIDE
- Applicable Documents
- Scope
- Important Safety Precautions
- ICU Operation Instructions
- Array Installation
- Assembly Instructions for the PCS 1x4x4 Array
- PCS 1x8x8 Array Assembly Instructions
- Beamer System Setup
- BEAMER System Sector Array Installation Record
- Test Procedure for Measuring the Rx Gain Balance
- Smart-Terminal Program Description
- BSM (BEAMER SYSTEM MANAGER) PROGRAM
- Functions
- Requirements for Operation
- User Interface Description
- Status Reports
- BSM S/W
- BSM Main Screen
- Comm Port Selection
- Password Entering
- Host Selection
- Installation of ICU in System
- Failure Conditions Selection
- BEAMER Limits Definition
- Shut Down Conditions Enable/Disable
- ICU Limits Definition
- System Definition
- Sub-Array and BEAMER Setting
- Sub Array Setting
- BEAMER Installation
- Column and Row Definition
- Sub-Array Status and Attenuator Setting
- Control & BEAMER Setting
- BEAMER Control
- ICU Status
- ICU CTRLR Status
- ICU Properties
- SOFTWARE DOWNLOAD GUIDE
- WARRANTY
- Exclusions
- Warranty Limitations
- INDEX
CONTENTS
Proprietary Information
Title: BEAMER Array System
Assembly and Operation Manual
Doc. No.: 913000000 Rev.: 00 Page: 6 of 92
3.4.2. Report by Sending Messages (Monitoring) ............................................................................. 63
3.4.3. BEAMER Array System Control............................................................................................. 63
3.5. BSM S/W 64
3.5.1. S/W Installation ....................................................................................................................... 64
3.5.2. S/W Operation ......................................................................................................................... 64
3.6. BSM Main Screen 64
3.7. Comm Port Selection 65
3.8. Password Entering 65
3.9. Host Selection 65
3.10. Installation of ICU in System 66
3.11. Failure Conditions Selection 66
3.12. BEAMER Limits Definition 67
3.13. Shut Down Conditions Enable/Disable 67
3.14. ICU Limits Definition 68
3.15. System Definition 68
3.16. Sub-Array and BEAMER Setting 69
3.17. Sub Array Setting 70
3.18. BEAMER Installation 71
3.19. Column and Row Definition 72
3.20. Sub-Array Status and Attenuator Setting 73
3.21. Control & BEAMER Setting 73
3.22. BEAMER Control 74
3.23. ICU Status 75
3.24. ICU CTRLR Status 75
3.25. ICU Properties 76
4. SOFTWARE DOWNLOAD GUIDE 77
4.1. Introduction 77
4.2. Overview 77
4.2.1. Downloading Software to the ICU........................................................................................... 77
4.2.2. Downloading Software to the BEAMER................................................................................. 79
4.3. User Interface for SW Download 80