Bluetooth Stereo Headset +Stereo Adapter BTST-9300D User Manual
Thank you Getting Start Thank you for purchasing the Bluetooth Stereo Headset. The Headset is designed for audio device users to have a high quality stereo sound and a wireless operating range up to 10 meters. Please read the instruction manual to make the best use of the Headset. We hope you will enjoy the high quality stereo sound and power of Bluetooth wireless technology. 1 Charge battery Box content - Bluetooth stereo headset - Bluetooth stereo adapter - Power Adapter - User guide Overview 1.
2 Power On 4 Pairing - Press and hold the pairing wheel on the stereo headset for 6 seconds until the blue and red LEDs flash alternately. - Press and hold the control button on the stereo adapter for 6 seconds until the blue and red LEDs flash alternately. - Use the power switch to turn on the power 3 Plug into the audio device 5 Volume Control Vol+ Vol- Use the volume buttons on the stereo headset to adjust volume. - Plug the audio connector into the audio port of the audio device.
Use with mobile phone 6 Set volume mode 1.5 seconds 1 Pairing Press and hold the pairing/track wheel button on the stereo headset for 6 seconds to set the stereo headset into pairing mode. The blue and red LEDs will be flashing when the stereo headset is in pairing mode. To properly perform pairing procedure on your mobile phone, please refer to the manual of your mobile phone for its own pairing instruction. This device name is set to be "Bluetooth Stereo Headset".
Use with computer device Important Information The stereo headset can also be used with Bluetooth enabled computer device, such as PC, notebook, and PDA. The stereo headset includes a special designed track wheel and play on/off button that provide users with an easy control to Windows Media Player. Product care - Use of non-original accessories may result in performance deterioration, injury, products damage, electronic shock, and warranty termination.
About Pairing What is pairing? Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to enter passkeys. Bluetooth Passkey The Bluetooth Stereo Headset has a default passkey 1234 for pairing, which is stored in its internal memory.
CE Statements Copyright and Trademark Notices This device has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC. Copyright 1998-2005 Cellink Co. Ltd. All rights reserved. The Cellink logo is trademark of Cellink Co. Ltd in Taiwan and may be registered in other countries.
The manufacturer warrants that the Bluetooth Stereo Headset shall conform to her published specifications, which may be subject to change, and remain free from defects in materials and workmanship under normal, proper and intended use within warranty time, provide that proof of purchase be furnished with any returned equipment. During the warranty period, if any component part of the equipment becomes defective by reason of material or workmanship, the manufacturer is immediately notified of such defect.