User's Manual

Connect and Disconnect

Connect

There are two ways to setup a Bluetooth connection.

Select Remote Device First

Select a remote device and double click it to refresh its services. Bluetooth passkey may be

asked if security level of either side of the connection is set to High and they are not paired

devices. After service searching finished, the services that the remote device supports are

found and the corresponding service icons on the top of the main window will change to be

pink color.

Double click the pink color service icon you want to connect on the top of the Main Window.

Connection will be setup. After connection is OK, the remote device and the service icon will

turn green.

Note:

PAN: If the PAN server side does not connect to a DHCP server, it will take about 45 seconds

to assign the IP address for the PAN client. Users have to wait about 45 seconds before using

TCP/IP.

DUN: There will be a dial-up dialog box. The user needs to input the ISP phone number, its

name and the password.

FTP: After connection is setup, a FTP Window will pop up. The window shows the shared

directories of the remote device. The window may be empty if there is no file or directory on

the remote site.

OPP: There are four kinds of operation modes for OPP: Send My Card, Get Card, Send

Objects and Exchange Cards. At the beginning, the default operation is Send My Card. Users

can right click the icon to select operation on the popup menu. Send My Card will send my

card directly to the remote device. Get Card will try to require the owner’s card from the

remote device. Exchange Cards will send my card first and then get the remote device card.

Send Objects will pop up a file dialog box to let users to select some object files to send to the

remote device. Object means the files in the format of vCards2.1, vCalendar1.0, vMessage

and vNote.