User guide

DELETE : Select a channel and press the red button on the remote control, Delete will appear
on the rightof the program edit menu next to the channel you have chosen. Press the
red button again to confirm the delete, the channel will be deleted. However if you
decide not to continue to delete press the menu button to quit.
SWAP : Select a program, and press YELLOW button, then you can use and buttons
to change the position of the program, press YELLOW again to confirm the change.
Press menu to exit and it will automatically save the current set.
SKIP: Select a channel and press the blue button to label the channel, as long as the channel
has a skip label it will be skipped when searching through the channels with the CH+/-
buttons.
Program Edit: Press button to enter the submenu as the following picture.
ATV Manual Tuning Press button to enter the submenu.
Storage To Select a position to store the program.
Current CH Select a program you want to tune.
Search Press and buttons to manual search.
Fine-Tune Press and buttons to fine-tune.
Skip Select “Yes” to skip the program when you
scan the programs by CH+/-
Frequency Display the current channel’s frequency.
Press RED button to save all the setups you have changed.
CI Information
Please contact your “pay perview” provider who can supply a viewing card and cam unit with
instructions for their use.
SWAP
Menu Settings (continued)
9
20