User guide

Picture Mode

Choose from Standard, Dynamic, User and Mild.

Contrast Controls the difference between the brightest and darkest regions of

the picture.

Brightness Controls the overall brightness of the picture

Colour Control the colour.

Tint Controls the tint ( NTSC mode only).

Red Controls the red colour of the picture.

Green Controls the green colour of the picture.

Blue Controls the blue colour of the picture.

Sharpness

Colour Temperature

Aspect Ratio

Noise Reduction

Increase this setting to see crisp edges in the picture; decrease it for

soft edges .

Choose from Standard, Cool, User and Warm.

Choose from Auto, 4:3, 16:9, Zoom1 and Zoom2.

Reduce any interference noise by selecting “ON”.

Note: Contrast, Brightness and Colour are only available and can be adjusted in

the User mode option in the Picture Mode Settings.

Note: Red, Green and Blue are only available in PC, VGA mode when in Colour

Temperature Mode.

Use the and buttons to select the PICTURE menu (as the picture above), press

button to enter the menu.

Menu Settings (continued)