User guide

Allows you to setup the sleep timer to : 10min, 20min, 30min, 60min, 90min,

120min,180min, 240min and off.

The EXTRAS menu includes the following options :

Child Lock

First Time Installation

PC Setup (only in VGA mode)

Set Password

Sleep Timer

* Please ensure that the aerial is connected to the connector labelled

“RF”on the rear of the TV. Press “OK” to start the tuning process.

* You can select “Language”(OSD display language), When you

have selected, press

buttons to select “OK”.

Press button to enter the submenu to adjust the picture of the screen.

Set pin code. The default is 0000. If the Pin code has been changed you

must enter the present code.

New : Enter the new password.

Confirm: Enter the new password and press OK to complete the change.

Lock the channel, you have to enter the code to view the channel. Use

button to select the channel, and press the green button on the remote

control to set, and there will be a “ ” on the channel, press the green

button again to cancel.

Use the and buttons to select the EXTRAS menu (as the picture above), press

button to enter the menu.

Menu Settings (continued)