User manual

9
3. Turn on Bluetooth function on your device, search for and select BT Soundbar
If connection is successful, the unit beeps and the LED light up stably.
If the pairing can not be completed within one minute, the LED flashes slowly.
● Select and play audio files or music on your Bluetooth device.
● During play, if a call is incoming, music play is paused. Play resumes when the call ends.
● You can also operate the playback using the remote control.
To play, press on the remote control. To pause/resume play, press again.
To select music tracks back/forward, press / keys.
4. To disable the current connected Bluetooth device, press PAIR (18 Remote) button
The Bluetooth LED will flash slowly . You can now try to connect your sound bar with another Bluetooth device.
5. To exit Bluetooth, select another source.
Note:
● The operation range between the sound bar and a Bluetooth device is approximately 10 meters (30 ft).
● The music streaming may be interrupted by obstacles between the device and the sound bar,such as wall, metal
casing that covers the device, or another device nearby that operates in the same frequency.
● The manufacturer does not guarantee 100% compatibility with all Bluetooth devices.
Adjusting the display brightness
Press the DIMMER button (16) repeatedly to cycle through the 3 brightness states.
Wall mounting the Sound bar
1. Align the Sound bar in the chosen location. Use a pencil to mark the drilling positions 340mm apart.
2. Drill holes as marked in step 1.