User's Manual

Call Info 72
Settings
This menu allows you to set all the options related
to calling: call forwarding, call waiting, etc.
Info at call end
To set On or Off the systematic display of the length
and/or cost of each call when hanging up.
Any key answer
When On, this options allows you to accept a call by
pressing any key, except ) (used to reject a call).
Call waiting
Caller ID
To Show or Hide your identity to your
correspondent. The Status will inform you on which
option is activated.
Call forward
To divert incoming calls to your mailbox or to a
number (whether in your contacts or not) and
applies to: Data calls, Voice calls and Fax calls.
Total cost To display the accumulated cost
and to set the counter to zero (may
be protected by PIN/PIN2 codes).
• Show how much has been spent
based on the Charge rate.
• Reset the current total cost.
• Show balance to check the
remaining credit (based on the
Cost limit).
• Cancel cost limit
• Cost limit to enter the cost limit
used in the Show balance menu.
• Charge rate to set the rate per
unit. First enter the currency
used (3 characters maximum),
then enter the cost per unit.
With GSM
call
Applies to All calls, Voice calls, Fax calls
and Data calls. When this option is
active, you hear a beep if someone
tries to call you while already on a
call. Select the Status option to find
out whether the GSM call waiting is
active or not.
With GPRS
call
Allows you to set On or Off the call
waiting for voice incoming calls
while a GPRS connection is ongoing.