User's Manual
Table Of Contents
- How to
- Bluetooth (BT)
- Homepage
- Bookmarks
- Input address
- Recent pages
- Settings
- Browser options
- Preferences
- Security settings
- Accessories
- Battery Care
- Chargering attention
- Care and maintenance
- Product Care
- Access Codes
- Radio frequency energy
- Specific Absorption Rate (SAR) information.
- Electronic devices
- Pacemaker
- Persons with pacemakers
- Hearing aids
- Aircraft
- Potentially explosive atmospheres
- Driving
- Emergency calls
2
Getting Started
Please read the safety instructions in the "Safety Information and
Notices"
section before use.
This section provides information about the Calback Services with this mobile
phone when a
Callback SIM card is installed.
2.1 Inserting the SIM Card and the battery
Remove the back
cover and the battery
Make sure the phone is switched off. Hold the phone with the front
facing downwards;
lift the back cover p to remove it.
Insert the SIM card
Make sure that the metallic contacts are facing downwards.
Insert the SIM card into SIM1 slot or into SIM2 slot or both.
Install the battery
With the metallic contacts of the battery facing the metallic contacts in
the battery slot, press
the battery down into
its slot until it locks into place.
Insert a T-Flash
Card (Optional)
Lift up the T-Flash card cover, with the metal contacts facing down,
gently slide the T-Flash
card into the slot. Press and push the cover to lock it. “Lock” will
prompt you in the correct
direction.