User's Manual

2.2 Power on
To power on, press and hold the Power key. Enter the SIM PIN code if required.
If you enter an
incorrect PIN code 3 times in succession, your SIM card will be locked. To
unlock it obtain the
PUK code from your network operator.
2.3 Charging the Battery
Ensure the battery is inserted in the handset. To charge the battery, plug in the
charger connector at
the bottom of your phone (charger port) and then plug the other end into an
AC power socket.
The battery symbol indicates the charging status. While charging, the charge
indicators will scroll.
When all the scroll bars are steady, the battery is fully charged. It takes about 4
hours
to fully charge
the battery. Disconnect the charger from the phone. Disconnect the charger
from the AC power socket.
If the battery is completely flat, the battery icon will reappear after a
few minutes of charging.
2.4 Keypad Auto Lock and Reset to Factory Setting
Keypad Auto Lock
Go to Settings > Security settings > Auto keypad lock to select the time for
keypad
lock.
I n idle mode, if the time expires, the keypad will be locked automatically.
Reset to factory setting and erasing all user data
Enter *#73738# will erase all call logs, SMS logs, pictures and other user
records and will reset to
factory setting.