User's Manual

4/6
During conversation is in progress, press the volume buttons repeatedly until you reach the desired volume level.
(g) Call Inter-Changing:
(1)Headset to Handset:：During conversation is in progress, press and hold the V+ & V- buttons simultaneously.
(2)Handset to Headset：Press the MFB.
Restore to Default - Remove Previous Pairing & Connection
You may want to reset the headset to default setting and clear the previous pairing. Please follow these simple steps.
(a) Ensure the headset is under standby mode.
(c) Press and hold the volume + & V- buttons simultaneously for 10 sec. until LED flashes blue & red
alternatively. Release the buttons.
(b) Again, press and hold the V+ & V- buttons simultaneously for 2 seconds until the headset emits 2 short
beeps. The headset will be powered off and resume default setting.
(d) After defaulting, if the headset is powered on again, the LED will flash red every 3 seconds and headset
will emit 3 beeps every 1 minute. The headset will be powered off within 2 minutes. It’s different from
the normal powering-on indication. The headset will be only back to normal powering-on
indication-LED flashes blue every 3 seconds after completion of pairing with Bluetooth devices.
Button Function & Pairing Code:
Function
Power Switch
Pairing
AG (Audio Gateway) Accessing
Call Answering
Call Ending
Voice Activation Dialing
Call Rejecting
MFB
Last Number Redialing
Volume Tuning (Press repeatedly)
V+ & V-
Call Interchanging
Pairing Code
0000
LED Indication
Headset Mode Red LED Blue LED Sound Indication
Off Mode
Off Off
Power On
On for 3 sec. 1 short beep
Power Off
On for 3 sec. 1 long beep
Standby - before Pairing
Flashes every 3 sec. 3 beeps every 1minute
Standby - after Pairing
Flashes every 3 sec.
Standby - Low Voltage
Flashes every 3 sec. 3 beeps every 1minute
Talking in Progress
Flashes every 15 sec.