#
CL800BT MANUAL Safety Precautions Avoid long time expose to the direct light or heat. Faults may occur if kept in extreme of temperatures. May become damaged if dropped or knocked. Problems may occur if exposed to humid and/or dusty conditions. Do not use if power cable or plug are damaged. Use only dedicated cable/adapter. Do not disassemble. Do not look directly at the light source, as this can cause damage to the eye.
CL800BT MANUAL Regulatory Information FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules.
CL800BT MANUAL - Redirect or reposition the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment to a socket on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: This equipment may generate or use radiofrequency energy.
CL800BT MANUAL Laser Safety: Environmental Notice This product does not any materials specified harmful to the human body. At the end of this product’s service life, please separate with the life waste and discharge or go to the Celluon service center for environmental protection.
CL800BT MANUAL Battery Information Battery service life: 220 minutes continuous use (max) Capacity: 830mAh (max) @ 3.7V Charging the Battery Use the adapter supplied for connection to the power supply. The battery will now start charging. Charging time: 150 min Caution - Use of any other adapter may cause the battery to explode. - After purchasing the product, charge the battery before use. - Charging time is dependent on ambient temperature i.e. it may be longer or shorter in extreme heat or cold.
FO;33EW#PDQXDO# # Table Contents 1. FEATURES...................................................................................9 2. COMPONENTS ..........................................................................10 3. PARTS AND THEIR FUNCTIONS .............................................11 3.1 FRONT .................................................................................. 11 3.2 REAR....................................................................................12 3.3 TOP ..............
CL800BT MANUAL 5.2 PALM OS ............................................................................36 5.2.1 System Requirements .................................................36 5.2.2 Installation/Upgrading/Uninstalling...............................36 5.2.4 PK Settings ..................................................................44 5.2.5 PK Tutorial ...................................................................49 5.2.6 Shortcut Icon Keys............................................
CL800BT MANUAL 1. Features Uses normal QWERTY keyboard layout. Compact size (convenient to carry). Includes function and shortcut icon keys. Robust and durable, uses optical technologies Bluetooth and serial port interface connections. Rapid entry keys. Economical, uses an integrated, rechargeable lithium battery. Compatible with Pocket PC, Palm OS and Windows.
CL800BT MANUAL 2. Components Laserkey Installation CD Case Quick Install Guide Adapter Serial cable is optional. (refer to http://www.celluon.com.
CL800BT MANUAL 3. Parts and their Functions 3.1 Front Pattern Projector Sensor Module Infra Red Light Source Projector: projects the keyboard image. Infra Red Light Source: supplies the light source to allow the Sensor Module to recognize key strokes. Sensor Module: recognizes key strokes and transmits them to the processing device.
CL800BT MANUAL 3.2 Rear Power Switch Comm. & Power Ports POWER UP / DOWN Æ ON / OFF Switch Communication & Power Ports Serial Port RC232C Cable Power Port 1A @ 5V adaptor Only use the cable / adapter supplied.
CL800BT MANUAL 3.3 Top Communication & Battery Power Status LED Status Battery Status LED o Charging Æ Red o Fully Charged Æ Green o Battery Power Low Æ Orange o (Power off within 5 minutes.
CL800BT MANUAL * What is Bluetooth? Standard wireless communication between wireless communication devices using low power and over short distances. Note: When you want to exit from using Pocket PC and CL800BT with Bluetooth communication setting, exit by using Pocket PC own keyboard. (Due to operating error, it may reset Pocket PC). 4. How to Operate 4.1 Installation 1. Install software as described in “Manual 5”. 2. Turn power on. 3. Connect device to computer via cable. 4.
CL800BT MANUAL 4.2 In Bluetooth Mode 1. Install software as described in “Manual 5”. 2. Turn power on. 3. Set up Bluetooth environment as described in “Manual 5”. 4. Use laser keyboard. 5. How to install, remove and use software 5.1 Pocket PC 5.1.1 System Requirements 1. Microsoft Windows 2000/XP operating system. 2. Microsoft ActiveSync 3.6 or above. 3. Pocket PC based on Microsoft Windows Mobile 2003, with Bluetooth (Widcomm or Microsoft). 5.1.
CL800BT MANUAL 1. Installation 1) Connect PC to Pocket PC via ActiveSync. 2) Insert installation CD into the CD-ROM drive of your PC to start the installation program. 3) Follow installation program instructions. 2. Upgrading Download and install a new driver from http://www.celluon.com. 3. Uninstalling 1) Select Today Æ Settings Æ System Æ Remove Programs as shown in Figure 1.
CL800BT MANUAL Figure 1. Uninstalling the Driver 2) Choose Projection Keyboard and click Remove, as shown in Figure 2. Follow the on-screen instructions. Figure 2.
CL800BT MANUAL 5.1.3 Connection Method To connect a Pocket PC to the Projection Keyboard follow the instructions below. 1. Turn on power to Pocket PC and Projection Keyboard. Note: Verify that sufficient battery power is supplied to the Projection Keyboard device 2. Run the program required to enter the keyboard as shown in Figure 3 (e.g. Note). Figure 3.
CL800BT MANUAL 3. Select Projection Keyboard from the options, as shown in Figure 4. Figure 4.
CL800BT MANUAL 4. When the Bluetooth Browser is open, choose CL800BT, as shown in Figure 5. Figure 5.
CL800BT MANUAL 5. You are now ready to use the Projection Keyboard. To change the Projection Keyboard’s set values, click on the Projection Keyboard icon to view the control panel, as shown in Figure 6. This icon Figure 6.
CL800BT MANUAL 5.1.4 Disabling the Projection Keyboard Sound When the user clicks the keyboard sound icon, a clicking sound is emitted from the Pocket PC. To turn off the sound, click the keyboard sound button once; click again to turn it back on, as shown in Figure 7. This icon Figure 7.
CL800BT MANUAL 5.1.5 PK Settings Application Click on the settings icon to change the different setting values on the Projection Keyboard, as shown in Figure 8. This icon Figure 8. PK Settings Icon Click the settings icon to view the Change Settings screen, as shown in Figure 9. These settings enable the user to adjust key repeat, key sound and key sensitivity.
CL800BT MANUAL 5.1.5.1 Main Change Settings Tab Figure 9. Main Change Settings Tab Key Repeat By using Key Repeat, continuously pressing a key causes the value to be entered repeatedly. Select the Key Repeat checkbox to use the key repeat function or deselect to disable the function.
CL800BT MANUAL Keyboard Sound Clicking the Keyboard Sound function causes a clicking sound to be emitted from the Pocket PC. Select the Keyboard Sound checkbox to turn on the key sound function or deselect it to disable the function. Sensitivity If the Projection Keyboard has a problem with key sensitivity, adjust the setting using the slider. For details, see “8. Adjusting Key Sensitivity”. Restoring Defaults To restore all functions to their default values, click the Restore Defaults button.
CL800BT MANUAL 5.1.5.2 Power Save Mode Adjust the Power Save Mode from the Power tab on the Change Settings screen. Power Save Mode On Click on the Power Save Mode On checkbox to use this function, as shown in Figure 10. Figure 10.
CL800BT MANUAL Standby Change the Standby setting value to alter the time elapsed before the system enters Standby mode. In Standby mode, if no keys are pressed within a given period of time the device will enter a low power mode until a key is pressed again. Figure 11.
CL800BT MANUAL Wakeup Response To use the keyboard again, press any key or area of the keyboard. Change the Wakeup Response settings to adjust the speed for switching between Standby and normal mode, as shown in Figure 12. Figure 12.
CL800BT MANUAL Turning Off the Projection Keyboard Once in Standby mode, if no keys are pressed within the time specified in the Turn Off After field, the device will enter Power OFF mode, as shown in Figure 13. To use the keyboard from Power OFF mode, turn the Projection Keyboard on again. Figure 13. Power OFF Mode Time Setting Restoring Defaults To restore the settings in the Power tab to their default values, click the Restore Defaults button.
CL800BT MANUAL 5.1.5.3 Projection Control Adjust keyboard brightness using the settings in the Projection tab. Projector Normal Adjust the keyboard brightness using the slider for the Projector Normal setting, as shown in Figure 14 Figure 14.
CL800BT MANUAL Projector Standby Mode Change the settings in the Projector Standby box to set the keyboard brightness in Standby mode, as shown in Figure 15. Figure 15. Projector Standby Restoring Defaults To restore the settings in the Power tab to their default values, click the Restore Defaults button.
CL800BT MANUAL 5.1.5.4 Driver Information Driver information for the Projection Keyboard is located under the About tab in the Settings screen, as shown in Figure 16. Figure 16.
CL800BT MANUAL 5.1.6 Tutorial Click the Tutorial icon in the Projection Keyboard control panel to launch the Projection Keyboard Tutorial, as shown in Figure 17. The Tutorial offers information on how to use the Projection Keyboard. This icon Figure 17.
CL800BT MANUAL 5.1.7 Shortcut Icon Keys Table 1.1 below shows the description for each icon. Icon Functions Switch to Today screen Run To Do program Run Mail program Run Find program Run Web Browser Run Calculator program Run Calendar program Run Address program Table 1.
CL800BT MANUAL 5.1.8 Function Key and Ctrl Key Table 1.2 shows FN and CTRL key combinations.
CL800BT MANUAL 5.2 Palm OS 5.2.1 System Requirements 1. Microsoft Windows 2000/XP operating system. 2. HotSync software. 3. Palm OS 5 or later. 5.2.2 Installation/ Upgrading/Uninstalling For the serial port driver, please refer to http://www.celluon.com Installation 1. Insert CD into the CD-ROM drive of the PC to run the installation program. 2. Follow the on-screen instructions to install the program. Upgrading Find out above new drivers by referring to http://www.celluon.
CL800BT MANUAL Uninstalling 1. Select App Æ Delete, as shown in Figure 18. Figure 18.
CL800BT MANUAL 2. Select PK Settings and click Delete… , as shown in Figure 19. Delete the PK Tutorial using the same method. . Figure 19.
CL800BT MANUAL . 5.2.3 Establishing a Connection with the Projection Keyboard To establish a connection between a Palm device and the Projection Keyboard, please follow the instructions below. 1. Turn on the Palm device and the Projection Keyboard. Note: Check that sufficient battery power is supplied to the Projection Keyboard device. 2. Click the PK Settings icon to run the program, as shown in Figure 20. Figure 20.
CL800BT MANUAL 3. On the Palm Bluetooth device screen, select Current Discovery in the Show items, as shown in Figure 21. Figure 21.
CL800BT MANUAL 4. Select CL800BT, as shown in Figure 22. Figure 22.
CL800BT MANUAL 5. Click the OK button. The system will display a Connecting screen, as shown in Figure 23. Figure 23.
CL800BT MANUAL 6. Once the Palm device and Projection Keyboard are connected, a tutorial screen is displayed, as shown in Figure 24. Figure 24.
CL800BT MANUAL 5.2.4 PK Settings Once the Palm device and Projection Keyboard are connected, run the PK Settings program again to change the Projection Keyboard settings. 5.2.4.1 Main Screen Select the Main screen to view Settings, as shown in Figure 25. You may set the following functions: Figure 25.
CL800BT MANUAL Key Repeat By using Key Repeat, continuously pressing a key causes the value to be entered repeatedly. Select the Key Repeat checkbox to use the key repeat function or deselect to disable the function. Keyboard Sound Clicking the Keyboard Sound function causes a clicking sound to be emitted from the Pocket PC. Select the Keyboard Sound checkbox to turn on the key sound function or deselect it to disable the function.
CL800BT MANUAL Disconnecting To disconnect the Palm device from the Projection Keyboard, click on the Exit button. 5.2.4.2 Power Save Screen In the Power Save menu, you can change settings related to power consumption, as shown in Figure 26. Figure 26.
CL800BT MANUAL Power Save Mode Select the Power Save Mode Off checkbox to disable Power Save Mode, or deselect the checkbox to run Power Save Mode. Standby Mode Change the Standby setting value to alter the time elapsed before the system enters Standby mode. In Standby mode, if no keys are pressed within a given period of time the device will enter a low power mode until a key is pressed again. Wakeup Mode To use the keyboard again, press any key or area of the keyboard.
CL800BT MANUAL Restoring Defaults To restore the settings in the Power tab to their default values, click the Restore Defaults button. 5.2.4.3 Projector Screen Adjust the brightness of the keyboard on the Projector menu, as shown in Figure 27. Figure 27.
CL800BT MANUAL Power Save Mode Shows whether the Power Save option is turned on or off. Keyboard Brightness Change the Projector Normal slider to adjust the keyboard brightness. Keyboard Brightness in Standby Mode Change the Projector Standby slider to adjust the keyboard brightness when in Standby mode. Restoring Defaults To restore the settings to their default values, click the Restore Defaults button.
CL800BT MANUAL 5.2.5 PK Tutorial Click the PK Tutorial icon to launch the tutorial. You can view information on how to use the Projection Keyboard within the tutorial, as shown in Figure 28.
CL800BT MANUAL Figure 28.
CL800BT MANUAL 5.2.6 Shortcut Icon Keys Table 2.1 shows the description for each icon. Icon Functions Switch to Today screen Run To Do program Run Mail program Run Find program Run Web Browser Run Calculator program Run Calendar program Run Address program Table 2.
CL800BT MANUAL 5.2.7 Shortcut Keys Table 2.2.lists the FN and CTRL key combinations.
CL800BT MANUAL CTRL FN - ↓(Down Arrow) Page Down CTRL - Z Undo CTRL - X Cut CTRL - V Paste CTRL - C Copy CTRL - A Select All CTRL - U Undo CTRL - S Select All CTRL - F Find CTRL - P Paste Table 2.
CL800BT MANUAL 6. Keyboard Layout Key layout of Projection Keyboard is as follows.
CL800BT MANUAL 7.
CL800BT MANUAL Key input e.g. 1) to input "Á" character: Press FN key and ' key simultaneously. Release both keys. Press SHIFT and A simultaneously. Key input e.g. 2) to input " ñ " character: Press the FN key, SHIFT key and ` key simultaneously. Release keys. Press N. Key input e.g. 3) to input "€" character: Press FN key and C key simultaneously. Release both keys. Press E.
FO;33EW#PDQXDO# 8. Adjusting Key Sensitivity The Projection Keyboard determines key input based on the amount of light reflected from the finger. Since the perceived amount of light changes depending on the surrounding environment, key sensitivity should be set according to userspecific conditions. How to Adjust Key Sensitivity 1. Click Sensitivity on the settings screen. 2. Adjust the Sensitivity slider. Check if a key stroke is recognized by pressing the center of the space bar key.
FO;33EW#PDQXDO# Caution - Key sensitivity must be adjusted each time a new user accesses the keyboard according to the new user’s requirements. - To ensure correct operation, avoid extreme light sources. - Relevant environmental factors include: - Direct sunlight, artificial light, Infra Red Data Association (IrDA), remote control devices.
FO;33EW#PDQXDO# # 9. Safety Precautions Never look directly at the light source. Avoid direct sunlight or high levels of infrared rays. Do not use in extreme brightness. Do not use under very bright incandescent light. Do not insert conductive material into the device, or damage the power or communication ports. Do not strike or knock the device as this may cause damage or operational failure. Do not disassemble the device.
FO;33EW#PDQXDO# caused by water. (Determined by color on the attached sticker.
FO;33EW#PDQXDO# 10. Troubleshooting The device will not turn on. Cause: Discharged battery. Solution: Charge the battery fully. Key strokes not recognized even though the keyboard is connected. Cause: Sensitivity set too low. Solution: Reset to higher sensitivity and restart the device. Keyboard image is not visible even though the keyboard operates. Cause: 1. When brightness is set low, standby or off 2. The device is not charged. Solution: 1. Set brightness high, normal or on 2. Charge the device.
FO;33EW#PDQXDO# Solution: Move to a flat surface. Incorrect keys are recognized when typing. Cause: Sensitivity is set too high. Solution: Reset to lower sensitivity and restart the device. Cause: The device was not positioned on a flat surface. Solution: Move to a flat surface.
FO;33EW#PDQXDO# 11. Specifications and Dimensions Keyboard Project Items Specifications Light source Red Laser diode Keyboard layout 17mm QWERTY layout Keyboard size Approx. 241mm*106mm Keyboard position Approx.
FO;33EW#PDQXDO# Electrical Condition Items Specifications Power source Integral lithium battery Battery capacity 830mAH(Max)@3.7V Adapter Rating 1A @ 5V Interface RS232C serial Bluetooth v1.1 class 2 Power consumption Max. 3W@5V Environmental Condition Items Specifications Operating temperature Approx. 0~35°C Storage temperature Approx.
FO;33EW#PDQXDO# Compatible Operating Systems Microsoft Windows Mobile 2003 Palm OS 5.x Microsoft Windows XP Size (mm): 93 * 39 * 37.5 Weight: 109g For information on device and driver compatibility, please refer to http://www.celluon.com Technical Support: Celluon,Inc. IT Venture Tower West 16F ,78 Garak-bondong, Songpa-gu, Seoul, 138-803, Korea support@celluon.com Tel.
