User's Manual

- 7 -
4.4. Installing a WLC-101M
λ Remove the WLC-101M module from its protective packaging.
λ Avoiding Electrostatic Discharge
Before you install the WLC-101M module, ground yourself by touching
a piece of metal to avoid electrostatic discharge (ESD). You should
also take the following precautions to prevent damage to the
WLC-101M module:
λ Keep the WLC-101M module in its antistatic-shielded bag until
you are ready to install it.
λ Handle the WLC-101M module by its edges.
λ Ensure the connector is connected to above Model’s board tightly.