Installation Guide

Dentil Blocks
Dentil blocks finish dentil molding
and can be installed at the ends,
center, corners or the outside.
To install at ends, position the dentil-
molding flange behind the soffit
flange and trim as indicated in the
illustration. (An option to installing
at the end position is to scribe a
line onto the dentil block, remove
that portion and then position the
dentil block at the end of the dentil
molding.) (Fig. 1)
To install at the center, position the
end block at the center of the opening
and then butt the dentil molding ends
into the end of the block. (Fig. 2)
To install inside corners, cut and
remove sections as shown in the
illustration. Once removed, pop rivet
the two pieces together and then
fasten it to the wall. (Fig. 3)
To install outside corners, cut and
remove sections as shown. Once
removed, pop rivet the two pieces
together and then fasten it to the wall.
(Fig. 4)
frieze, rake and band boards
accessories installation
Fig. 1
Fig. 2
Fig. 3
Fig. 4
39