Installation Guide

ManualsBrandsCellwood ManualsBuilding materialsEvolutions Double 5 in. x 24 in. Vinyl Siding Sample in Beige

leaf relief

leaf relief

82

Leaf Relief

®

EZ5340-DIY

Installation

Prepare the Gutter

Clean and flush existing gutters and

downspouts thoroughly with water.

Install Leaf Relief

®

System

For proper function, the Leaf Relief

®

surface (front to back) must be level

or have a slight slope toward the

fascia. (Figure 1)

NOTE: Call 1-800-962-6973 for

assistance with hangers that cause a

forward slope.

Mounting to Gutter

Using the existing spikes or hidden

hangers for support, place Leaf

Relief

®

section flat on the gutter

(see sticker denoting “This Side

Down”).

Using screws provided, attach Leaf

Relief

®

with three (3) screws on

front and two (2) screws through the

plastic strip on back as shown.

(Figure 2)

Attach remaining pieces, making sure

to overlap 1/2˝ with adjacent Leaf

Relief

®

sections. Place one screw

through metal overlap. (Figure 3)

1/2" Overlap

Fig. 1

Fig. 2

Fig. 3