Warranty

CELLWOOD WARRANTY CELLWOOD WARRANTY REGISTRATION
We’re Here For You
We hope this is just the beginning of our relationship. We’re eager to provide you with technical support, design
assistance and straight answers to any questions or comments you may have about our products or your installation.
You know how to contact your local dealer and now you know how to reach us. Call toll-free (800) 335 - 6701.
Care And Maintenance
Cellwood® products are some of the most durable building products materials available today for residential applications.
In most cases, normal rainfall is sucient to keep it clean. But if your Cellwood® products should need cleaning, the
following procedures are recommended. Particular attention should be given to areas under eaves, porches, awnings
and other overhangs that have limited exposure to the natural washing eect of rainfall.
1. Moderate Atmospheric Dirt
An occasional washing with clear water using a garden hose and soft-bristled brush is recommended (a long-handled,
car-washing brush is ideal for this purpose).
2. Heavy Industrial Atmospheric Dirt
Wash in the manner indicated above, but use the following solution:
a. 1/3 cup detergent (Tide®, for example)
b. 2/3 cup trisodium phosphate (Soilax®, for example)
c. 1 gallon water
3. Mildew Accumulation
Mildew can collect on surfaces of all types of building products and is often evident on surfaces that have not been
properly cared for and maintained. Normally, mildew will appear as black spots. Mildew is easy to remove by using the
aforementioned basic cleaning solution with the addition of hypochlorite as follows:
a. 1/3 cup detergent (Tide®, for example)
b. 2/3 cup trisodium phosphate (Soilax®, for example)
c. 1 quart sodium hypochlorite 5% solution (Clorox®, for example)
d. 3 quarts water
4. Caulking Compounds, Tar and Similar Substances
Use mineral spirits in reasonable amounts and apply directly to the foreign substance. Immediately after cleaning, rinse
the area thoroughly with water.
CAUTION: Do not exceed the recommended concentrations of cleaners. To do so can cause damage to the products’
surfaces. Avoid skin and eye contact with the solution, and in all cases follow manufacturers’ instructions for the use
of cleaning compounds and solutions. Avoid use of abrasive-type cleaners and strong solvents. Test any cleaner on an
inconspicuous area before applying to major areas. To minimize streaking, always clean from the bottom to the top and
follow with a rinsing of clean water. Excessive scrubbing is unnecessary, can be harmful to the products and may cause
undesirable glossy areas over the nish.
THIS IS TO CERTIFY THAT CELLWOOD® BRAND PRODUCTS
HAVE BEEN INSTALLED AT THE RESIDENCE OF:
Name: Homeowner:
Address:
Date of Installation: Contractor:
INSTALLATION RECORD
HOMEOWNER: Complete this section, please.
Name:
Address: City: State: ZIP:
Phone: Email Address:
Installation Date: Installation Address (if dierent from above):
Please indicate type of application:
Remodeling Construction New Home Addition
Please indicate the Cellwood products used in this installation. (See applicable warranty for complete coverage details.)
CELLWOOD® VINYL PRODUCTS
Product Prole Color
Dimensions®
Progressions®
Evolutions™
Cedar Dimensions®
Board & Batten
Colonial Beaded
Vinyl Sot
Outside Corner Posts
OTHER CELLWOOD® PRODUCTS
Product Prole Color
Aluminum Sot
Aluminum Fascia
Trim Coil
Shutters
Door Surrounds
Window Mantels
Gable Vents
Designer Accents
How did you learn about Cellwood?
Newspaper TV Direct Mail
Salesman/Contractor Radio Magazine
Telephone Friend/Neighbor Yellow Pages
Internet Other
How did you learn about the builder/contractor you chose?
Newspaper TV Direct Mail
Salesman/Contractor Radio Magazine
Telephone Friend/Neighbor Yellow Pages
Internet Other
How satisfied are you with the builder/contractor?
Very Satised Satised Not Satised
How satisfied are you with the products installed?
Very Satised Satised Not Satised