Owner's manual

I 0184 - 11

5.3 - RECALCULATION OF THE UNBALANCE

Press after new setting of the measurement.

After performing a balancing spin, the amounts of unbalance are shown on the digital readouts.

Digital readouts with LED ‘s 3 - 4 lit up indicate the correct angular wheel position to mount the counte-

rweights (12 o’clock position). If the audible alarm is enabled (see FUNCTION MENU MANAGEMENT),

the acquisition of the correction position sounds with a “beep” alarm.

In the event of unbalance less than the selected threshold value

, is displayed in place of the

unbalance value , with it is possible to read the values below the selected threshold gr. by gr.

5.4 - MEASUREMENT RESULT

Fig. 10

Inside correction Outside correction