Owner's manual

I 0184 - 20
GB
8 - ROUTINE MAINTENANCE
Switch off the machine from the mains before carrying out any operation.
8.1 - REPLACING FUSES
Remove the weight holder shelf to gain access to the power supply board where the fuses are located. If
fuses require replacement, use ones of the same current rating.
If the fault persists, contact Technical Service.
NONE OF THE OTHER MACHINE PARTS REQUIRE MAINTENANCE.
9 - RECOMMENDED SPARE PARTS LIST
(For references, see exploded drawings)
CODE DESCRIPTION
020600503 Bearing 6005 - 2Z Ø 25/47/12
181198630 Spring 19863P
080077007 Rigid belt Poly V - TB2 - 770 - 7 crested
67M38954H Position pick-up board with cable
05PR34147 LEXAN Panel
182185750 Distance gauge spring C61 Z
181206560 Distance gauge spring C61
67M36950A Power board
681002000 Fuses DM5x20 - 2A
511231002 Switch KL 1002 + Q555
86SC52468 Computer board C61Z
86SB36752 Cable, automatic distance gauge C61 Z
86SB36751 Cable, automatic diameter gauge C61 Z
86SB34144 Cable with standard microswitch protection
86SB40113 Cable with 42” microswitch protection
SPECIAL PARTS FOR 230 V MACHINE
501054213 Single phase motor BIMA 220-240V/50-60 Hz - 0.18Kw 63/B3-4p.
86SZ37439 Complete power board
611000314 Braking transformer 30 VA 230 - 0/50
568001458 Capacitor 10MF 450V Faston screw M8
611000308 Power transformer 30 VA 230 - 9/9
SPECIAL PARTS FOR 115 V MACHINES
502054114 Single phase motor BIMA 110-115V/50-60 Hz - 0.18Kw 63/B3 - 4p.
86SZ37440 Complete power board
611000313 Braking transformer 30 VA 115 - 0/25
568002557 Capacitor 25MF 450V FASTON vite/screw M8
611000307 Power transformer 30 VA 115 - 9/9
SPECIFIC SPARE PARTS - CSA STANDARDS
502054117 Single phase motor 4 poles 63/B3 0.18 Kw 115 50/60 Hz
67M36950C Power board ( CSA )
568002540 Capacitor 25MF ( CSA )
611000301 Power transformer 30 VA
611000310 Braking transformer 30 VA
681002001 Fuse 5x20 GMA 2A ( CSA )