Instruction Manual

I 0186 GB - 20
6.3 - AUTOMATIC GAUGES
6.3.1 - RIM DISTANCE GAUGE
- Shift the distance gauge to position , keeping it quite still,
press
- Move the gauge to position
, press
CORRECT CALIBRATION
- Return the gauge to rest position
- The wheel balancer is ready for operation
N.B.: In the event of errors or faulty operation, the writing appears on the display : shift
the gauge to position and repeat the calibration operation exactly as described above. If the
error persists, contact the Technical Service Department. In the event of incorrect input in the rim distance
gauge calibration function, press to cancel it.
6.3.2 - DIAMETER GAUGE
- Currently preset diameter.
- Set the diameter with which to calibrate the machine (10÷18”)
with
- Press
- Move the gauge tip into measuring position (Fig. 8/Pos.A) and
keeping it still, press
CORRECT CALIBRATION
- Return the gauge to rest position
- The wheel balancer is ready for operation
In the event of incorrect input in the rim distance gauge
calibration function, press to cancel it.