Instruction Manual

I 0709 - 14
Pos B
Pos A
FI
4
4a
GB
4.5 - ► DATA SETTING
4.5.1 - AUTOMATIC STANDARD SETTING ►
Using the special grip, move the end of the gauge against the rim in one of the positions A/B shown.
a) Standard weight : in one of the positions A/B indicated in fi gure 4.
L.T. /SUV FUNCTION
ON INDICATOR
(see enabled buttons)
FUNCTION ON
INDICATOR: Sonar
“WIDTH”.
b) Adhesive weight: in the position indicated below.
Note: always use the round part of the striker plate.
Position of adhesive
weight
Hold the gauge in position for at least 2 seconds.
If the acoustic signal is enabled (
ACOUSTIC SIGNAL), the acquisition of the dimensions is accompanied by a
“beep”.
Set the distance+diameter gauge to the rest position.