User guide

6.1 MENU ACCESS DIAGRAM 20
6.2 UNBALANCE OPTIMIZATION 21
6.3 STATISTICS 21
6.3.1 Weight statistics screen 21
6.4 CALIBRATIONS 22
6.4.1 Gauge calibration 22
6.4.1.1 Distance gauge calibration 22
6.4.1.2 Diameter gauge calibration 22
6.4.1.3 Width gauge calibration 22
6.4.2 Balancing machine calibration 22
7. SETUP 23
7.1 LANGUAGE 23
7.2 SCREEN-SAVER TIME 23
7.3 ACOUSTIC SIGNAL 23
7.4 SETTING THE CLOCK 23
7.5 GUARD OPENING DURING SPIN 23
7.6 AUTOMATIC POSITION REPEATER 23
7.7 OPTIONS 23
7.7.1 Lift zero weight 23
7.7.2 Eccentricity setup 23
7.7.3 Enabling of serial output RS232C (option) 23
7.7.4 Printer enabling (optional) 24
7.7.5 Wheel locking enable 24
7.7.6 Gauge locking enable 24
7.8 BALANCING SETUP 24
7.8.1 Unit of unbalance measurement 24
7.8.2 Unbalance display pitch 24
7.8.3
Tolerance ( CORRECTION METHOD ) 24
7.8.4 Spin with guard closed 25
7.8.5 Opposite position 25
7.8.6
STATIC ALWAYS ENABLED 25
7.9 CORRECTION METHOD 25
7.9.1 Standard correction method 25
7.9.2 External plane correction method 25
7.9.3 I.C. (intelligent correction) correction method - The option is not enabled for Canada and the USA 25
7.9.4 LT automatic 26
7.9.5 Tyre train 26
7.9.6 Weight statistics 27
7.10 SPECIAL FUNCTIONS 27
7.10.2 WHEEL Balancing machine SELF TEST 27
8. DIAGNOSTICS 28
9. MAINTENANCE 31
9.1 GENERAL 31
9.1.1 Introductory notes 31
9.1.2 Safety rules 31
9.1.3 Replacing fuses 31
9.1.4 Cleaning the TOUCH screen 31
10. DISPOSAL 32
10.1 DISPOSING OF THE BALANCER 32
10.2 DISPOSING OF ELECTRONICS COMPONENTS 32
11. SPARE PARTS 32
11.1 IDENTIFICATION AND ORDERING METHOD 32
12. ATTACHED DOCUMENTATION 32