Manual

54
Use and Maintenance Manual Rev. 11-2010
ENGLISH
7.3.1 LASER calibration
Displays the laser calibration graph
Saves the laser calibration values
Confirm
Goes back to the measurement screen
Return to main screen
Open the spindle and fit the specific calibration tool as shown in the figure.1.
Reserved Setup
THE TOOL CANNOT BE FITTED IN A POSITION DIFFERENT FROM THAT INDICATED IN THE FIGURE.
ALWAYS FIT THE CAP ON THE COLLAR.
DO NOT PERFORM A BALANCING SPIN WITH THE CALIBRATION TOOL FITTED.
Close the spindle and the guard and press the confirm button. 1.
View the graph of the values read (only if necessary to check details).2.
Save the calibration3.
Press 4.
to exit from the screen.